Gibson es 333 pickguard

Gibson ES 333

Gibson es 333 pickguard

no comment

es333 pick guard install
I purchased a short guard and bracket for my es333 but I’m not sure about the proper mounting of the bracket. Any tips

I did this a few years ago. I just looked at numerous photos of ES guitars online, and installed accordingly. The PG sits on top of the block, if that helps. Just study lots of pics and install the bracket where you see it done and you should be fine. Of course, drill pilot holes using a 1/16 bit. You should be good, and should only take a minute. Guards look great on those 333s, BEST bang for the buck ES ever, still have numerous regrets selling mine. Buffed out, with PUP covers, looks like a poor mans 335.
Good luck!

Good advice from Kris. This is pretty much what I did when I installed a long guard on mine. Just check out some photos and go for it. It’s quick and easy.

Without the guard

Also put a short guard on a ES-135 I no longer have.

__________________
The best responses we get from an audience are when we do our worst material.
– Frank Zappa

In a nut shell the sequence of operations is . Mount/secure the pickguard at the neck pickup the body. Position the mounting bracket at the binding and test fit several times to find the right location and relative position of the threaded position of the screw into the mounting block. You need to fiddle with this adjustment as it effects the angle of the guard relative to the body and you want to ensure that the screw is hidden behind the guard once it’s in place. Last step is to glue the mounting block the pickguard. Done. Take your time and triple check everything. Look at lot of pics to establish where the mounting bracket should be placed near the binding. Since 333’s are not an actual model that had pickguards, there’s not a right or wrong way to do it. I would personally base it though on what they did originally; for long guards look at ’59-’61, for short pickguard look at ’62 or later.

Originally Posted by ZZ Not

Pickguard + Bracket Set fits Gibson es 333 335 340 new or vintage archtop jazz

tem condition:
New
Ended:
Sep 28, 2012 07:42:56 PDT
Price:
US $23.99
[ 8 sold ]

Item specificsCondition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitions-opens in a new window or tab

Click on “ME” for Jim’s monthly jazz guitar column….featuring artist profiles, jazz guitar education materials. transcribed solos…much more!
Call Jim if you need assistance 401.419.0621
We now carry all three volumes of the new Wes chord method books….see other auctions
Now shipping only to confirmed Paypal addresses.
All bids are private to protect your security and privacy! Please remember your bid is a contract.

Scroll down for pics!!

Please read the entire ad before bidding to make sure it will fit your application!!!

This set is designed to be used on the Gibson models 333, 335, and 340. You may be able to adapt it to other Gibson models (see pics for measurements).

If you are on a budget and need to get a guard back on your guitar, this is a great set to get you back in business fast. Includes all parts necessary for mounting: side screw, corner screw, black nitro block, guard, and bracket.

Excellent value on this pickguard and bracket set that is a good replacement for the Gibson thinline models 333 and 335. Very economical solution to get a guard back on your guitar fast! Comes with nickel hardware. See drawing below for measurement. If you are trying to fit this on a non-Gibson guitar, please compare your guitar with the measurements in the drawing before bidding. I do not guarantee a fit on any other guitars besides the Gibson 333 and 335. (The portion of the pickguard that sticks up between the pickups can be made smaller using a flat file to remove mterial if you need to ‘size’ it). This is the high quality AllParts guard that is an equal to the original Gibson, in geometry, hole placement, and appearance…I give it an A+ as a replica!…you can’t tell the difference. AllParts sticker on back (which you can remove if you prefer).

Includes the same bracket used on the factory Stromberg guitars! see last picture below. Set also includes one 5-ply beveled vintage-style short 335 guard. Nice quality, with pre-drilled hole in the corner (99% of customers have reported this hole lined up on their factory Gibson 335). Also includes one nickel bracket…..bracket has a one inch side bracket and 2.25 inch rod…the correct 335 size. ABS mounting block and side screw included. (The fit of the bracket at the ‘shoulder’ will be determined by the placement of the hole in the guitar’s rim; we have found this bracket to be a workable fit on the Gibson thinline models and copies of this type of guitar). ABS block requires super glue installation under guard.

Most people have been very happy with this set, and I’ve sold alot of them. If you receive the set and decide it will not work on your project, all we ask is that you pay shipping BOTH ways in returning in order not to place undue burden on a family business. Please measure before bidding. Thank you!

Nice quality working set at a great price!

Shippping to usa 4.50

International buyers please read…new shipping policy…..

international Shipping USPS 14.50 for INSURED international shipping…..On some small items, we are now able to offer international shipping WITH insurance….You will receive a USPS customs form number with your order. (this shipping cost accounts for the greater amount of time, materials, risk, and insurance cost that are all necessary when we ship internationally.) Customs offices will often hold packages for 4 – 6 weeks….please be prepared to wait for that…i have no control over that process.

international International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer’s responsibility. You are responsible for any customs fees that your country adds during the importation process. Please check with your country’s customs office to determine what these additional costs will be prior to bidding or buying

Many international customs offices will sometimes hold a package for up to 30 days prior to delivery. I have no control over this.

Tags:

Leave a Reply

You must be logged in to post a comment.